This is a very limited SPECIAL PURCHASE.
This is our "FF" Series. The FF1000 neck will fit an of the FULLY HOLLOWBODY bodies we are offering here- like the FF600 or FF700. These are "In Production" factory products so they are assembled and ready for your final finishing. You'll need to do all the TLC stuff stuff- sanding, grain filling, final finishing, level and dress for the frets. These are NOT just bolt-ons. You MUST hand shape the tenon, hand fit the neck to the body- a bit of a project but the basics are all there. The leading edge of the nut slot is pre-sawed, but you will need to cut a nut slot. You may need maple shims, or a good set of files to make these work.
These are solid hard rock maple with a rosewood fingerboard. The neck is fully bound.
Now the exciting part- these are long tenon necks that fit our FF Series Hollowbody style bodies- GLUE IN set neck. WAY cheaper than a guitar kit and you'll have the opportunity to finish in good old fashioned lacquer and make your own great guitar.
These take a 43mm Lp Style nut, and have a 57mm wide tenon- that fit our FF Series bodies.
22 nickel silver medium jumbo frets are installed.
These take any of our standard 3x3 tuners, and have a 10mm hole.